 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| SENSOR PROBE FORMAT | ||||||
| HPX | -XXX | X | -X | -XX | -XX | -XX |
|
Type |
Diameter |
Length (Example 1 only) |
Temperature |
Type |
Length |
Type |
| C: Cylindrical B: Button T: Threaded R: Rectangular S: Flat D: Dual Flat |
(.0254) |
A: 0.500" (12.70) B: 0.625" (15.87) C: 0.750" (19.05) D: 0.875" (22.23) E: 1.000" (25.40) F: 1.250" (31.75) G: 1.500" (38.10) H: 1.750" (44.45) I: 2.000" (50.8) |
A: 32 to 300ºF (0 to 149ºC) E: -100 to 400ºF (-73 to 204ºC) V: -100 to 1600ºF (-73 to 871ºC) S: -100 to 1832ºF (-73 to 1000ºC) |
L2: .093 (2.36) L3: .063 (1.60) I2: .125 (3.18) N: .125 (3.18) ND: .165 (4.19) T: .063 (1.60) |
(about 0.3m) |
M: 10-32 Microdot Male B: BNC Male FX: MCX Female MX: MCX Male |
|
(Example 2 only) |
||||||
|
A: .093" (2.36)
B: .065" (1.65) C: .125" (3.18) D: .025" (0.64) |
||||||
Please consult factory for availibility of probe selection
Dimensions: All dimensions are shown as typical only. Please contact the factory for exact dimensions.
Maximum Range: Same as the diameter of the sensor element. (Minimum range is touch or 0.1% of full scale.)
LINEAR Range: Two thirds (0.67) times the sensor diameter typical.
Probe Interchangeability: ±10% of full scale maximum change, ±2% typical.
Probe Material Composition: A and E, stainless 303: V, Inconel 600, other materials available.
Calibrations: There are 21 numbered, standard calibrations available, please consult factory and specify when ordering.
Range:
•Standard listed ranges are ratios from 0 to10.000VDC analog output, but each probe may be calibrated with several range versus sensitivity calibrations. Calibration sensitivity from 0.001VDC/0.001" (0.0254mm) to 10.000VDC/0.001”(0.0254mm) are available.
•Range is defined as from touch to full scale reading, ±50% of range = ±10.000VDC calibration optional.
Grounding: “-D” dip coatings are available to prevent the electronically driven sensor/guard elements from being accidentally earth grounded and shorted.
Extension Cables: Many extension cables are available depending upon connector types. Consult factory for proper part numbers. Example: EC-D-L2-5 is a standard 5 foot extension cable with female BNC to male BNC connectors.
| CABLE SPECIFICATIONS | |||
| Cable Temperature Range for “A” & ”E” Probes, -65°F to 446°F (-54°C to 230°C) |
|||
| Type L2 | OD .093” (2.36) | Teflon | ~ 30 pF/ft (90/m) |
| Type L3 | OD .063” (1.60) | Teflon | ~ 26 pF/ft (78/m) |
| Type I2 | OD .125” (3.18) | Teflon | ~ 14 pF/ft (42/m) |
| Cable Temperature Range for “V” Probes, -98°F to 1600°F (-72°C to 870°C) |
|||
| Type T | OD .063” (1.60) | Semi-rigid Inconel 600 powder filled | ~ 60 pF/ft (180/m) |
| Type N | OD .142” (3.61) | Flexible Inconel Braided | ~ 20 pF/ft (60/m) |
| Type ND | OD .165” (4.19) | Low Impedance Shield Version of N | ~ 35 pF/ft (105/m) |
